Lian Li O11D XL - Side radiator and SSD

Associate
Joined
6 Sep 2015
Posts
6
Hi,

I need a new case with more airflow and looking at the O11D XL. There appears to be no way to contact Lian Li unless you have a claim or are an influencer.

I am looking at compatibility with the side fans and SSD, could someone answer the following questions.

1) The website says that 280mm and 360mm radiators will fit, but I have a Arctic Freezer 240mm, it does look like it will fit but can anyone confirm
2) If I use the side mount it looks like the additional SSD slots wont be able to be used is this correct ?

Thanks
 
Associate
Joined
22 Jun 2018
Posts
1,320
Location
Doon the watah ... Scotland
1) If a 360 will fit, then so will a 240 … same width, different length.

2) The SSD mount panels look like they are individual, and so could be removed singly. With a 240, you could remove the top 2 panels, leaving the 3rd bottom panel in place for an SSD. ( Going by the pictures at least )
 
Associate
Joined
5 Mar 2017
Posts
1,811
Location
Cambridge
The radiator size is maximum size. 120 - 240 - 360 (for 120mm fans) or 140 - 280 (for 140mm fans).
The SSD can be installed on the slim bar on the PSU Chamber. If you check https://www.overclockers.co.uk/lian...ied-aluminium-full-tower-white-ca-77l-ll.html , you'll notice few black grommets that allow to install SSDs.
I've chosen the white version as it is easier to notice. The bar I mention is used to stop cables from forcing the side panel. Depending how you do your cable management, using the top positions may be the best option.
You can also use the HDD cage. Very handy as it have the cables pre-installed.
 
Top Bottom