Printing Issue

Associate
Joined
2 Oct 2020
Posts
92
Hoping someone on here can help identify if this is expected when printing:

https://ibb.co/FhZXrcH

I performed 2 prints of the same item, and it did roughly the same thing in the same spot.

The printer is an Creality CR-6 SE printing with PLA - will have to check what printer settings were.
 
Associate
Joined
2 Oct 2020
Posts
92
Thanks for the link I will take a look. It looks like Cura has relaxed the settings since the video was made, mine comes with:
Max Res: 0.25mm
Max Travel: 0.25mm
Max Dev: 0.025mm
 
Associate
Joined
2 Oct 2020
Posts
92
Thanks for the replies - will test different Z seam settings and see if I can replicate the issue.
 
Top Bottom